Конфиг Squid не реагирует или я глупенькой? Есть конфиг Squid. Есть куча кудахтеров подключённых по локалке к компьютеру с осьминогом. Цель: запретить доступ к интернету всем айпишникам с 192.168.0.233 до 192.168.0.254.
При попытке это сделать - конфиг перезагружается без всяких предупреждений, но доступ на этих компьютерах всё равно есть. Хелп ми, остолопу такому.конфиг сквида# WELCOME TO SQUID 3.1.20
# ----------------------------
#
# This is the documentation for the Squid configuration file.
# This documentation can also be found online at:
# http://www.squid-cache.org/Doc/config/
#
# You may wish to look at the Squid home page and wiki for the
# FAQ and other documentation:
# http://www.squid-cache.org/
# http://wiki.squid-cache.org/SquidFaq
# http://wiki.squid-cache.org/ConfigExamples
#
acl manager proto cache_object
#acl localhost src 127.0.0.1/32 ::1
#acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
#acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
#acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl badboys src 192.168.0.233-192.168.0.254
acl localnet src 192.168.0.2-192.168.0.232
#acl localnet src 192.168.0.0/24 # RFC1918 possible internal network
#acl localnet src fc00::/7 # RFC 4193 local private network range
#acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 554 #test port
acl Safe_ports port 1119 # blizzard ports
acl Safe_ports port 1120 # blizzard ports
acl Safe_ports port 3724 # blizzard ports
acl Safe_ports port 4000 # blizzard ports
acl Safe_ports port 6112 # blizzard ports
acl Safe_ports port 6113 # blizzard ports
acl Safe_ports port 6114 # blizzard ports
acl Safe_ports port 8000 # tcp
acl Safe_ports port 8001 # udp
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
http_access allow Safe_ports
# Only allow cachemgr access from localhost
http_access allow manager localhost
http_access deny manager
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost
http_access deny badboys
# And finally deny all other access to this proxy
http_access deny all
# Squid normally listens to port 3128
http_port 8080
# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid3
# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern (Release|Packages(.gz)*)$ 0 20% 2880
# example lin deb packages
#refresh_pattern (\.deb|\.udeb)$ 129600 100% 129600
refresh_pattern . 0 20% 4320

Предыдущий
вопрос Следующий
вопрос